SG200 Vacuum Sweeper

SMALL BUT THOUGH
The TRILO SG200 has been designed as an addition to the compact series, giving a range of TRILO machines which are all of them meeting to the customer's specific needs.  His suction power is phenomenal and his overall dimensions are modest, so that at a lot of places can be worked where other machines don't have the possibility to come.

The TRILO SG200 is widely used in the world of stud-farms and race courses where it is used for removing horse-dung in the field. Small droppings can be sucked up by the flap brush axle hood, on the other hand it is possible to remove larger droppings with the hand held hose.



The SG 200: an addition to the compact series of the TRILO range



The TRILO SG200: fast unloading of the bin, also gives access to the filter system for clean up

Technical Specifications

Fan size:

Trilo ø600 mm / 4 blades

Drive:

PTO shaft, 540 rpm
twin V-belt transmission

Horsepower required:

Min. 25 HP at PTO

Overall length:

3,60m

Overall width:

1,30m

Overall height:

1,85m

Working width:

1,30m

Cargo capacity:

2 m3

Tyres:

Softtrac 18 x 9.50 x 8

Hydraulic pressure:

180 bar - 40 ltr/min

TAMED TORNADO
The centrifugal pump gives impressive performances. It is directly driven through a double V-belt transmission, which provides a silently working atmosphere around the machine. The centrifugal pump has a inspection trap in lower part of housing, so it will always be possible to inspect the pump in order to see if it is not filthy or damaged.

COLLECTING AND FILTERING
The streaming out of the incoming air happens through a double walled panel at the back of the machine which also takes care of the filtering of the out coming air. By passing a coarse net most of the dust- and litter particles are reduced so that working in the area around the machine is prevented from pollution of the surrounding air.

The box which has a 2.0 cubic metres loading capacity can easily be unloaded by a low tipping mechanism with single operated ram.
In combination with a French unloading door, it will reduce the chances on causing damage on the machine.

SPECIAL FEATURES
To give you the opportunity to use the TRILO SG200 in special conditions, there are some special features which can be used. The following accessories can be provided:
- Hand held hose ø200 mm with a length of 5 metres.
- Fully adjustable draw-bar, height and length
- Flap brush axle ø250 mm, mechanically or hydraulic driven with a working width of 1.30 metres.

In the latest model of the TRILO SG200 the filter grid can easily accessed for cleanup when the bin is upright in unloading position

You think this machine will fit to your demands and getting interested? Than have look at the page Contact Us which includes all the local dealers in Europe. On this page you have the possibility to get more information about all our products, by e-mail or post.